Hydra Tool Help Articles

1. Power off device
2. Run Hydra MTK Module
3. Click Boot INFO and Connect USB Cable
4. BROM Mode: Press VOL + (UP) 
5. Preloader Mode: Just Insert cable  
6. Install Drivers if necessary, (Drivers are available at Support Area)

1. Power off device
2. Run MTK Module, From Reboot Select Method " Old or New " Method. 
3. Click Reboot Buton and Connect USB Cable 
4. Install drivers if need, drivers available at Support Area

Boot Flash Mode by PCB Testpoint Shorting    

• Short out the CMD pin on the test ports to direct the device to boot into Flash mode,
• Test points on every model of OPPO is different, you can use Hydra Testpoint page to find Pinouts or use Google

Boot Flash Mode by USB cable  

• Power off device, Run Hydra MTK Module, Click Boot INFO and Connect USB Cable
• BROM Mode : Press VOL + (UP)   - Preloader Mode : Just Insert cable
• Install Drivers if necessary, (Drivers are available at Support Area) 

High OPPO MTK Models need Boot by PCB TestPoint, Like OPPO F5, F7, F9 e.t.c

1. Dissambelly your device, find test-points
2. Connect your device with PC with USB Cable
3. Run MTK Module, Select Brand and Model and Click BOOT INFO
4. Wait for until booting completed

Powered by Froala Editor

1. Power off device
   
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Tick Factory Reset Protection (FRP) and Click Excute 
4. Wait for Log Instructions and Connect USB Cable
5. Waiting for Until your task completed.

1. Run MTK Module, Untick Auto Select Brand and Model
2. Boot your device to Flash Mode, if you dont know how to do it, 
3. Please check to " How to Boot by Flash Mode " at Connection Tab 
4. Go to Service Tab, Tick Factory Reset Protection (FRP) 
5. Click Excute and Wait for your task complete.

1. Power off your device
2. Connect your device by Flash Mode with test point, you can check connection tag
3. Run MTK Module, Select Brand and Model
4. tick Factory Reset Protection (FRP) and Click Execute

Powered by Froala Editor

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Flash Tool Tab, Select Scatter.txt Firmware  
4. Click Excute Buton, Wait for Log Instructions and Connect USB Cable 
5. Waiting for Until your task completed.
   

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Service / Tool Tab 
4. Tick Wipe / Format Userdata / Factory Reset Option and Click Excute
5. Wait for Log Instructions and Connect USB Cable
6. Waiting for Until your task completed.

Powered by Froala Editor

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title
4. From the top right of the exe Select Connection: Meta Mode 
5. Tick Factory Reset / Format Userdata 
6. Tick Auto Restart, Click Execute and Wait for the task completed  

1. Run MTK Module, Untick Auto Select Brand and Model
2. Boot your device to Flash Mode, if you dont know how to do it,
3. Please check to " How to Boot by Flash Mode " at Connection Tab
4. Go to Service Tab, Tick Wipe/Format Userdata 
5. Click Excute and Wait for your task complete.
   

1. Power off the device
2. Run MTK Module, Select Platform: Feature 
3. From Top right of the exe, Select Connection: Meta Mode  
4. Tick Factory Reset, Click Execute
5. Wait for Instruction the tool and connect the USB cable.

1. Power on the device 
2. Go to Dial Screen, Dial *#558# 
3. Go to Verification Test -> Debug Port 
4. Run MTK Module, From top right of the exe Select Connection : ATE Mode 
5. Tick Vivo Special Tool, Select Port, Click Excute  

Powered by Froala Editor

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Service / Backup Tab, Select Option 
4. Click Backup Firmware Buton 
5. Wait for Log Instructions and Connect USB Cable 
6. Waiting for Until All Partitions Reading completed. 

Powered by Froala Editor

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title 
4. From the top right of the exe Select Connection: Meta Mode 
5. Go to Service / Repair IMEI Tab, Enable IMEI option 
6. Click Execute and Waiting for your task completed.  

It May not work on All MTK Cpu's and Protected Brands!

1. Power off the device
2. Run MTK Module, Select Platform: Feature 
3. From Top right of the exe, Select Connection: Meta Mode 
4. Go to Repair IMEI Tab, Enable IMEI Repair Function 
5. Enable IMEIs and Click Execute 
6. Wait for Instruction the tool and connect USB cable. 
7.    -> Watch the Video Guide !!!

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title
4. From the top right of the exe Select Connection: Meta Mode  
5. Go to Service Tab, Tick Network Lock Security, From Method Select Direct Unlock Option 
6. Click Execute and Wait for your tas completed. 

1. Power off the device
2. Run MTK Module, Select Platofrm : Feature 
3. From Top right of the exe, Select Connection : Meta Mode  
4. Tick User Coode, Select Method and Click Excute
5. Wait for Instruction the tool and connect usb cable. 

Powered by Froala Editor

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Tick Screen Lock Security 
4. You will see Method, Read Pattern, Remove Locks Without Data Loss, Disable Screen Lock Apps 
5. Read Pattern: This option for Android 5.1 and lower versions, Upper Encrypted User Data Not Supported
6. Remove Locks Without Data Loss: This option for Android 5.1 and lower versions, Upper Encrypted User Data Not Supported
7. Disable Screen Lock App: This Method Remove System UI, Encrypted Userdata Supported, You need to Restore Screen Lock App after Disable. 
8. Select Method and Click Execute then wait for the task completed.

P.S : This Function may not work on All MTK Brands 

1. Power on the device 
2. Go to Dial Screen, Dial *#558# 
3. Go to Verification Test -> Debug Port 
4. Run MTK Module, From top right of the exe Select Connection : ATE Mode 
5. Tick Vivo Special Tool, Select Port, Click Excute  

Powered by Froala Editor

* How to Boot MTK Flash Mode Using Hydra 

 * How to Repair IMEI MTK - MT6737

* OPPO A83 New Security Remove FRP and Format Video 

 * Read All MTK Scatter Flash File With Hydra Dongle 

 * How to Select DA, Auth, Preloader Manuel at MTK Module 

 * How to Factory Reset MTK by Meta Mode 

 * How to Write Firmware MTK Scatter?

* Motorola MTK Remove FRP Video Guide

* Vivo 1901 Y15 Remove FRP and Pattern Lock by Flash Mode  

 * Vivo 1901 Y15 Remove Pattern Lock by MetaMode 

 * Vivo Y81i New Patch Pattern and Frp Video Guide  

 * Vivo Y17 Password reset With Hydra Tool Vivo 1902 Android 9

* OPPO A5S Factory Reset [Format] Meta Mode

 * OPPO  CPH1609EX Reset Pattern Lock With Hydra Dongle  

 * OPPO A71 CPH1717 Format + FRP by Hydra 

 * OPPO  F7 CPH1819 FRP + Format with TestPoint by Hydra 

 * Oppo F3 How to Read Flash File,NV File With Hydra Dongle 

 * How to Repair IMEI MTK Feature Phone