Hydra Tool Help

1. Power off device 
2. Press and Hold vol down (-) and power
3. Waiting few seconds, you will see FTM at device of screen

1. Power off device
2. Run Qualcomm Module
3. Press and hold volume (+) Up and Connect USB Cable
4. Device will gonna black screen and Will ask for drivers
5. For Install Drivers you can use this setup

p.s: You can use "DFU to EDL" Function 

1. Power off device 
2. Run Qualcomm Module
3. Preses and hold volume (-) down and Power key
4. You will see FTM Screen on device, for more details check "How to Set FTM Mode"
5. Connect USB cable and Install drivers if need
6. From Reboot tab use "FTM to EDL Function"
   

How to Connect EDL (Emergency Download Mode)?

Whats is the EDL Mode ? 

Emergency Download (EDL) Mode is for Connection device for Read & Write Firmware, FRP, Screen Locks, Factory Reset Operations for eMMC and UFS Chips, 

QDLoader (EDL) Mode available only for Qualcomm Snapdragon devices.

There few methods for connection device to EDL Mode, this is depent on Brands 

1. Boot to EDL Mode by Boot Keys :

Most generic Qualcomm devices gonna EDL Mode by boot keys, Power off your device, 

Press and Hold Vol(+) UP and Vol(-) Down and connect USB Cable, if by this way enter EDL Mode it will ask you for drivers. 

2. Boot to EDL Mode by UMF Cable :

This cable provided by Hydra Dongle Free, this cable will help you for enter device to EDL Mode with EDL Buton. 

3. Boot EDL by PCB Testpoint Shorting :

Short out the CMD pin on the test ports to direct the device to boot into EDL mode, 

Testpoints on every brands and model is different, you can use Hydra Testpoint Folder for find Pinouts or use Google

Example of Huawei DUB-LX1 TestPoint 

4. Boot EDL by device Mode

We are build for you Reboot tab for change mode of the Device, 

Like " FTM to EDL ", " DFU to EDL", " Fastboot to EDL", "ADB to EDL" such some easy functions we are add for make your works mor easy. 

1. Power off device
2. Preses and hold volume (-) down and Power key Press and 
3. You will see Fastboot Mode on screen of device, this is changes on every brand. 

p.s : For most Android smart phones Fastboot operations " Bootloader need be Unlocked! "

1. Power off device
2. Preses and hold volume (-) Down and Power for a couple of seconds
3. You will see Fastboot screen on devices then you can leave keys. 

1. Power off your device
2. Reboot your device to Recovery Mode  
3. Press and Hold Vol (+) Up and Power for a couple seconds
4. You will see this screen and Select 3nd option (Connect with MiAssistant Mode)

Without Root Redmi Series: S2/Y2, Note 7, Note 5 Pro, Note 6 Pro, 7

1. Enable USB Debug (ADB) and Connect USB Cable
2. Run Qualcomm Module, at Reboot Tab Select " [ADB] Enable Diag (Not Rooted) "
3. and Click Buton, Accept from device, It will enable your diag of the device. 
4. Install Drivers if Need, You can find drivers at Hydra Support Area

By Root All Xiaomi Enable Diag

1. Enable USB Debug (ADB) and Connect USB Cable
2. Run Qualcomm Module, at Reboot Tab Select " [ADB] Enable Diag (Rooted) "
3. and Click Buton, Accept from device, It will enable your diag of the device.
4. Install Drivers if Need, You can find drivers at Hydra Support Area

Enable Diag By Dial Codes

1. Go to Diag Screen on device
2. Dial these codes #*#717717#*#* or *#*#13491#*#*

1. Power off device
2. Run Hydra MTK Module
3. Click Boot INFO and Connect USB Cable
4. BROM Mode: Press VOL + (UP) 
5. Preloader Mode: Just Insert cable  
6. Install Drivers if necessary, (Drivers are available at Support Area)

1. Power off device
2. Run MTK Module, From Reboot Select Method " Old or New " Method. 
3. Click Reboot Buton and Connect USB Cable 
4. Install drivers if need, drivers available at Support Area

1. Power off device 
2. Run Spreadrum Module 
3. Hydra Provide few method for booting device
4. By Brand and Model, by Compatible Loader, PAC Loader, Hydra Collections
5. Enable Tick ONE BOOT, Click Boot INFO  
6. Press and Hol Boot Key and Connect USB Cable 
7. VOL + OR VOL -, OR Combination Vol - +,  Please hold boot key until second boot.
8. After Booting device Do Not Remove USB Cable! 
9. Select any operation Doing. 

1. Power off phone
2. Go to Spreadrum Module 
3. From Reboot tab, Select Enter Diag, Click Buton
4. Connect USB Cable and Wait for Mode  

1. Download Latest Software From Here!  
2. Follow This Instruction for Install  

Boot Flash Mode by PCB Testpoint Shorting    

• Short out the CMD pin on the test ports to direct the device to boot into Flash mode,
• Test points on every model of OPPO is different, you can use Hydra Testpoint page to find Pinouts or use Google

Boot Flash Mode by USB cable  

• Power off device, Run Hydra MTK Module, Click Boot INFO and Connect USB Cable
• BROM Mode : Press VOL + (UP)   - Preloader Mode : Just Insert cable
• Install Drivers if necessary, (Drivers are available at Support Area) 

High OPPO MTK Models need Boot by PCB TestPoint, Like OPPO F5, F7, F9 e.t.c

1. Power off device
2. Press and hold Volume up and Connect a USB Cable to your LG Phone
3. Wait for Until you see " Download Mode " 
4. Leave keys. You need to see a Firmware Update screen.

1. Go to your phone Dialer PAD and type in the code:
2. *#546368#*Model Code# (if your device LG G3 D855 Then..),  or use   3845*#Model Code#
3. You need to enter like it  :  *#546368#*855#  or 3845*#855#
4. It should automatically launch you to the hidden Menu.
5. Navigate to SVC MENU > USB > PORT CHECK TEST and Enable it.
6. 277634#*#  This is for OLD Devices Diag Port enabled Code. 

1. Prepare software
2. Insert cable in Phone port
3. Do TestPoint, Insert cable in USB Hub/Port 
4. This way will not move phone and you dont need other person to insert cable. 

1. Go to Dial Screen on Device 
2. Dial *#*#2846579#*#* Hidden Menu Will be Enabled 
3. Go to Project Menu -> Background Settings -> Usb Port Settings -> Manufacture Mode 
4. Connect USB cable between your device and your pc, Install Drivers

1. Power off the device
2. Press and Hold volume down(vol-) and Power key for few secs
3. Wait for until you are seeing the fastboot logo on the screen, then leave keys 

1. Run SpreadTrum Module 
2. Select Brand and Model or CPU 
3. Click Boot INFO, Press and Hold Boot Key and Connect USB Cable
4. After SPD Loader is running, Please do not remove the USB cable

Powered by Froala Editor

1. Power off your device
2. Run SpreadTrum Module 
3. From Reboot Box Select Reboot option, Press to Execute Reboot
4. Follow the Logs Instructions 

Powered by Froala Editor

1. Charge the battery more than %30  
2. Connect device to EDL Mode, if you don't know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto 
6. Go to Service Tab, Tick Factory Reset Protection (FRP) 
7. Tick "Auto Restart Device" For Auto Reboot after the process completed 
8. Click Execute Buton, it will Read the information of the device and wait for operation completed.

1. Charge the battery more than %30
2. Connect device to Fastboot Mode, if you dont know how to connect then Check to "How to Connect " Tag
   
3. Run Qualcomm Module, From Top right of the exe Select Connection as " Fastboot Mode "
4. Click Excute Buton, it will Reset FRP of your device

p.s : Device of Bootloader Should be Unlocked, This operation not work on Bootloader Locked devices.

1. You need Set device to EDL Mode if you don't know how to set check "How to Connect" title
2. Run Qualcomm Module, Select Brand and Model
3. Go to Service Tab, Tick Factory Reset Protection (FRP)
4. Tick Auto Restart, Click Execute, it will Reset google account of your Xiaomi Device

P.S: Some devices need Authorized Server. 

Your device Bootloader status should be " Unlocked " for this operation!!

1. Power off the device, Charge the battery more than %30
2. Set device to Fastboot Mode, if you don't know how to do it then please check " How to Connect ? " title
3. Run Qualcomm Module, From the top right of the exe " Change connection as Fastboot Mode "
4.  Go to Service Tab, Tick Factory Reset Protection (FRP) and Click Execute

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
   
5. Go to Service Tab, Tick Factory Reset Protection (FRP)  and Tick Auto Reboot
6. Click Excute and Waiting for your task completed.

1. Charge the battery more than %30
   
2. Connect device at FTM (Field Test Mode) and Connect Usb cable
3. Install ZTE FTM Drivers, Drivers available at Support Area
4. if you dont know how to Set FTM Mode then Please Check " How to Connect " title 
5. Run Qualcomm Module, From top right of the exe Select "FTM Mode at Connection"
6. Go to Service Tab, Tick Factory Reset Protection (FRP)
7. From top right of the exe Untick Auto port and Select ZTE Dignostic Comport
8. Click Excute and Waiting for task completed.

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to " Connecttion " Title
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Run Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Factory Reset Protection (FRP) 
6. From Method Box Select " Vivo ForcedErase " Method and Tick Auto Reboot
7. Click Excute and Wait For Tas completed. 

1. Power off device
   
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Tick Factory Reset Protection (FRP) and Click Excute 
4. Wait for Log Instructions and Connect USB Cable
5. Waiting for Until your task completed.

1. Cherge the battery more than %30 and power off device
2. Run Spreadrum Module, Click BOOT INFO buton for Booting 
3. You can check Connection title also, " How to Boot Spreadrum by Flash Mode ? "  
4. Go to Service / Tool Tab, Tick Factory Reset Protection (FRP)
5. Tick Auto Reboot and Click Excute and Wait for your task completed.  

1. Run MTK Module, Untick Auto Select Brand and Model
2. Boot your device to Flash Mode, if you dont know how to do it, 
3. Please check to " How to Boot by Flash Mode " at Connection Tab 
4. Go to Service Tab, Tick Factory Reset Protection (FRP) 
5. Click Excute and Wait for your task complete.

1. Charge the battery more than %30 and Power off your device
2. Set device to " Download Mode " if you dont know how to do it, Please check Connnection title
3. Run Main Module, From top right of the Exe Select Platform/Tool : LG  
4. Go to Service Tab, Tick Factory Reset Protection, Click Excute
5. Wait for task completed.

New Authorized LG Devices are not supported for Reset FRP Operation!

• Disassembly your device and Testpoint your device 
• You can find Testpoint at Help / Testpoint Area 
• Your pc will attached COM 1.0 Driver, for Drivers you can check Hydra Tool Folder 
• Run Main Module, From the top right of the exe Select Platform: Huawei 

• Select Model or CPU  
• Click USB1 to Fastboot, your device will be going to Fastboot Mode
• Tick Factory Reset Protection (FRP) and Click Excute  

1. Charge the battery more than %30 
2. Connect device to EDL Mode, if you don't know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Flash Tab, Select Option Select Firmware auto or manual raw selection. 
6. Select rawprogram0.xml and patch0.xml
7. Click Execute, it will start writing firmware, wait for completed. 

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you don't know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto
6. Go to Flash Tool Tab, Select method of select File 
7. Auto Scan Raw/Patch XML or Manual Select Raw/Patch XML
8. Select Rawprogram0.xml and patch0.xml 
9. and click to Execute, Wait for All partitions writing. 

1. Set device to EDL Mode, if you dont know how to do it, Check " How to Connect " title
2. Run Qualcomm Module, Select brand and Model, you can see firmwares at support area of hydra 
3. if firmware extension is .tgz then you need decompress it by 7zip
4. Go to Flash Tool Tab, Select Firmware by Manuel select or Auto by Folder
5. Click Excute then Wait untill all partitions are writted. 

P.S : New Xiaomi devices need Authorised Server

Your device Bootloader status should be " Unlocked " for this operation!!

1. Power off the device, Charge the battery more than %30
2. Set device to Fastboot Mode, if you dont know how to do it then Please check " How to Connect ? " title
3. Run Qualcomm Module, From top right of the exe " Change connection as Fastboot Mode "
   
4. Go to Flash Tool Tab, Select File Type Auto Raw XML or Manuel Raw XML
5. When you select firmware it will Load partitions and Just click Excute!

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Flash Tool Tab, Select Scatter.txt Firmware  
4. Click Excute Buton, Wait for Log Instructions and Connect USB Cable 
5. Waiting for Until your task completed.
   

1. Charge the battery more than %30 and power off device
2. Select Option for Connection
3. Run Spreadrum Module, Click BOOT INFO button for Booting
4. You can check the Connection title also, " How to Boot Spreadrum by Flash Mode? " 
5. Go to Flash Tool Tab
6. Click Execute and Wait for All tasks completed.

1. Charge the battery more than %30 and Power off your device
2. Set device to " Download Mode " if you don't know how to do it, Please check Connection title
3. Run Main Module, From the top right of the Exe Select Platform/Tool: LG  
4. Go to Flashing Tab, Select KDZ Firmware
5. Click Flash it! button and Wait for the task completion.

1. Put your device to Download Mode and Connect USB Cable
2. Run Main Module, Go to Flashing Tab
3. Click Add Samsung Firmwares, Select Files which you want to write
4. Click Flash and Wait until your process completed. 

1. Set your device to fastboot mode, For set fastboot mode you can check the title "How Set Fastboot Mode ?"
2. Run Hydra Main Module, From Top Right Select Platform: Motorola
3. Select Mode: Fastboot
4. Go to Flashing Tab, Select XML Firmware
5. Tick Auto Reboot, and Click Start Flash [Fastboot] Button. 

Powered by Froala Editor

1. Power Off your device, Run SpreadTrum Module
2. Select Brand and Model or CPU
3. Click Boot INFO for Boot the Device, You can check Connection title for How-To Boot
4. Go to Service -> Tool Tab, Tick Partitions
5. From Method / Options Select, Write Dump - NOR 
6. Click Execute and Wait for Operation Completed.  

Powered by Froala Editor

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you don't know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto 
6. Go to Service Tab, Tick Format Userdata / Factory Reset
7. Tick Auto Reboot and click to Execute. 
8. Device Will Auto Reboot, if not press and hold power button for 30 secs. 

1. Charge the battery more than %30 
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Factory Format Userdata/Factory Reset and Tick Auto Reboot
6. Click Excute and Waiting for your task completed.
   

1. Set device to EDL Mode, if you dont know how to do it, Check " Connection " title
2. Install QdLoader drivers (Drivers are exist at Hydra Support Area)
3. Run Qualcomm Module, Select brand and Model,
4. Go to Service Tab, Tick Format Userdata / Factory Reset
5. Click Excute then Wait for task completed.

P.S : New Xiaomi devices need Authorised Server

1. Charge the battery more than %30
2. Connect device to Sideload (MiAssistant) Mode, and Connect usb Cable
3. if you dont know how to do it check to " Connection " title
4. Run Qualcomm Module, From top right of the exe Select Connection " ADB Mode "
5. Go to Service Tab, Tick Format Userdata / Factory Reset, From Method Select Factory Reset by Sideload
6. Click Excute and Wait for Task completed. 

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to " Connecttion " Title
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Run Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Format Userdata / Factory Reset 
   
6. From Method box Select Vivo ForcedErase Userdata 
7. Tick Auto Restart and Click Excute, Wait for Task completed.

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Service / Tool Tab 
4. Tick Wipe / Format Userdata / Factory Reset Option and Click Excute
5. Wait for Log Instructions and Connect USB Cable
6. Waiting for Until your task completed.
   

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title
4. From the top right of the exe Select Connection: Meta Mode 
5. Tick Factory Reset / Format Userdata 
6. Tick Auto Restart, Click Execute and Wait for the task completed  

1. Charge the battery more than %30 and power off device
2. Run Spreadrum Module, Select Connection Option 
3. Click BOOT INFO button for Booting
4. You can check the Connection title also, " How to Boot Spreadrum by Flash Mode? "
5. Go to Service / Tool Tab, Tick Factory Reset / Wipe Userdata 
6. Tick Auto Reboot and Click Execute and Wait for your task completed.

1. Run MTK Module, Untick Auto Select Brand and Model
2. Boot your device to Flash Mode, if you dont know how to do it,
3. Please check to " How to Boot by Flash Mode " at Connection Tab
4. Go to Service Tab, Tick Wipe/Format Userdata 
5. Click Excute and Wait for your task complete.
   

1. Charge the battery more than %30 and Power off your device
2. Set device to " Download Mode " if you don't know how to do it, Please check Connection title 
3. Run Main Module, From the top right of the Exe Select Platform/Tool: LG
4. Tick Factory Reset / Format User, Tick Auto Restart
5. Click Execute and Wait for the task completed.

1. Power on the device
2. Go to Dial Screen, Dial *#558#
3. Go to Verification Test -> Debug Port
4. Run Qualcomm Module, From top right of the exe Select Connection : AT Command Mode
5. Tick Format Userdata / Factory Reset, Select Port, Click Excute 

1. Power off the device
2. Run MTK Module, Select Platform: Feature 
3. From Top right of the exe, Select Connection: Meta Mode  
4. Tick Factory Reset, Click Execute
5. Wait for Instruction the tool and connect the USB cable.

1. Charge the battery more than %30
2. Put your device to Download Mode and Connect USB cable 
3. Run Main Module, Go to Service Tab
4. Tick Wipe/Format User Data/Factory Reset
5. From Method Select Option Exynos or Qualcomm 
6. Click Excute and Wait for your task completed.

1. Power on the Device
2. Connect USB cable at Regular mode 
3. Run Main Module, Select Platform Samsung 
4. Select Mode : AT/Modem Mode
5. Tick Wipe / Format Userdata and Click Execute
6. Wait few Secs until your task completed.  

• Disassembly your device and Testpoint your device 
• You can find Testpoint at Help / Testpoint Area 
• Your pc will attached COM 1.0 Driver, for Drivers you can check Hydra Tool Folder 
• Run Main Module, From the top right of the exe Select Platform: Huawei 

• Select Model or CPU  
• Click USB1 to Fastboot, your device will be going to Fastboot Mode
• Tick Factory Reset / Format and Click excute  

Powered by Froala Editor

1. Set your device to fastboot mode, For set fastboot mode you can check the title "How Set Fastboot Mode ?"
2. Run Hydra Main Module, From Top Right Select Platform: Motorola
3. Select Mode: Fastboot
4. Go to Service Tab, Tick Factory Reset / Format
5. Tick Auto Reboot, and Click Execute

Powered by Froala Editor

1. Power on the device 
2. Go to Dial Screen, Dial *#558# 
3. Go to Verification Test -> Debug Port 
4. Run MTK Module, From top right of the exe Select Connection : ATE Mode 
5. Tick Vivo Special Tool, Select Port, Click Excute  

Powered by Froala Editor

1. Power Off your device, Run SpreadTrum Module
2. Select Brand and Model or CPU
3. Click Boot INFO for Boot the Device, You can check Connection title for How-To Boot
4. Go to Service -> Tool Tab, Tick Factory Reset / Wipe User Data
5. Select Method / Option and Click Execute.  

Powered by Froala Editor

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Partitions
6. From Method Select Backup Method, we are prefer you are use " Backup All Partitions Except Userdata ", Because Userdata partition has big size.
7. Click Excute and Wait for All Partitions Reading.
   

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Go to Service / Backup Tab, Select Option 
4. Click Backup Firmware Buton 
5. Wait for Log Instructions and Connect USB Cable 
6. Waiting for Until All Partitions Reading completed. 

1. Charge the battery more than %30 and power off device
2. Run Spreadrum Module, Select Connection Option
3. Click BOOT INFO button for Booting
4. You can check the Connection title also, " How to Boot Spreadrum by Flash Mode? "
5. Go to Service / Tool Tab, Tick Backup Partitions
6. Click Execute and Wait for All partitions reading.

1. Power Off your device, Run SpreadTrum Module
2. Select Brand and Model or CPU
3. Click Boot INFO for Boot the Device, You can check Connection title for How-To Boot
4. Go to Service -> Tool Tab, Tick Partitions
5. From Method / Options Select, Read Full Dump - NOR 
6. Click Execute and Wait for Operation Completed.  

Powered by Froala Editor

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you don't know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto
6. Go to Service Tab, Tick Partitions, from Method Select Wipe Security
7. Tick Auto Restart and Click to Execute 

1. Charge the battery more than %30
2. Set Device to TWRP mode (Custom Recovery Mode)
3. Connect USB cable, Run Qualcomm Module
4. From the top right of the exe "Connection as ADB"
5. Go to Service Tab, Tick Partitions, From Method Select "Wipe Security by TWRP"
6. Please take a backup before the wipe, it will damage your network, if you don't know this function for what then please do not use it.

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto
6. Go to Service Tab, Tick Partitions, from Method Select Wipe Security
7. Tick Auto Restart and Click to Excute
   

P.S : Some New Xiaomi Devices Need Authorized Server

1. Charge the battery more than %30
2. Your devices should be TWRP (Custom Recovery) Installed
3. Connect device to TWRP Mode with Vol (+) Up  and Power Untill you are TWRP Screen
4. Connect Usb Cable and Run Qualcomm Module
5. From top right of the exe Select Connection as ADB Mode
6. Go to Service Tab, Tick Partitions, From Method box Select " Wipe Security by TWRP "
7. Click Excute Buton and Wait for task completed.

1. Charge the battery more than %30
2. Put your device to Download Mode and connect the USB cable 
3. Run Main Module, Go to Service Tab
4. Tick Write Default Encrypted System (EFS)  
5. From Method Select Option Exynos or Qualcomm 
6. Click Execute and Wait for your task completed.

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect " title
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. if Brand and Model not exist you can leave it as Auto
6. Go to Service Tab, Tick Partitions, from Method Select Wipe Security
7. Tick Auto Restart and Click to Excute

 8. After reboot Set device to FTM Mode, if you dont know how to connect then Check to "How to Connect " title  

 9. Install FTM  Driver, (Drivers are Available At Support Area)

 10. From top Right of the Exe " Select Connection as Diag Mode "

 11. Goto Repair Calbiration Tab, Then Go to IMEI/ESN/MEID Tab

 12. From top right of the exe Untick Auto select ZTE Dignostic Port,  Fill The IMEI box

 13. Enable IMEI Repair Option, Then Click to Repair IMEI [Diag] Buton. 

All Models are Not supported!! 

Please check from here Supported Models and Functions before process

Your device shold be Rooted for Enable Diag!

1. Enable ADB [Usb Debug] and Connect Usb Cable
   
2. Run Qulacomm Module, From Reboot Box select [ADB] Enable Diag (Rooted)
3. When you Enable diag Install Drivers of Diag Port (Drivers available at Support Area)
4. From Top right of the exe Select Connection as Diag Mode
5. Go to IMEI/ESN/MEI Tab, Enable IMEI Option, Fill the IMEI Box
6. Untick Auto Port, Select Diag ComPort, Click Repair IMEI [Diag] Buton. 

P.S : This Method for Generic Qualcomm Models, May not work on All Qualcomm Brands

P.S : Your device should be TWRP Installed and Rooted for this operation. 

1. Enable ADB (Usb debug) Only and Connect usb Cable
2. Run Qualcomm Module, From Top right of the tool " Select Connection as Diag Mode "
3. Go to Service / Repair Calbration / Xiaomi IMEI Tab
4. Enable IMEI Option, Select Model 
5. Click Repair IMEI buton, Wait for task completed. 

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title 
4. From the top right of the exe Select Connection: Meta Mode 
5. Go to Service / Repair IMEI Tab, Enable IMEI option 
6. Click Execute and Waiting for your task completed.  

It May not work on All MTK Cpu's and Protected Brands!

1. Power On device
2. Run Qualcomm Module, From top Right of the exe Select Connection: Diag Mode 
3. Go to Service,  Repair/Calibration, IMEI/ESN/MEID Tab  
4. Enable IMEI options, Select Method 1, Fill imei box
5. Go to Diag screen of the device, Dial #*20081111# and Connect USB Cable
6. Install Diag Drivers if need, Drivers available at Support Access 
7. From Top right untick Auto Port and Select Diag Port 
8. Click Repair IMEI [Diag] button and Wait for the task completed. 

1. Cherge the battery more than %30 and power off device
2. Run Spreadrum Module, Select Connection Option  
3. Click BOOT INFO buton for Booting
4. You can check Connection title also, " How to Boot Spreadrum by Flash Mode ? "
   
5. Go to Service / Repair Tab, Enable IMEI Option, Fill imei boxs
6. Click Excute and Wait for your task completed.

1. Cherge the battery more than %30 and power off device
2. Run Spreadrum Module, From Reboot Tab Select Enter Diag 
   
3. From top right Select Connection : Diag 
4. Go to Service / Repair Tab, Enable IMEI, Fill IMEI Boxes 
5. From Port Box Select Diag Port and Click Excute
6. Wait for Operation Completed, Reboot Device and Check IMEI's  

1. Power on your device, Enable Diag Mode and Connect USB Cable
2. If you are dont know how to Enable Diag, Please check Connection title  
3. Run Main Module, From top right of the Exe Select Platform/Tool : LG  
4. Go to Unlock and Repair Tab, Untick Auto Port, Select LG Diag Port 
5. Select Method of Diag Mode, Fill IMEI Box, Click Repair IMEI Buton 
   
6. Wait for your task complete and check your device

p.s: You need to Wipe Security for this operation be success, otherwise you will get fail 

1. Power on Device and Connect USB Cable
2. Run Main Module, From the top right of the Exe Select Platform/Tool: LG   
3. Go to Unlock and Repair Tab, Tick Modem Mode 
4. Untick Auto Port, Select LG Mobile USB Modem Port 
5. Click Repair IMEI Buton and Wait for your task completed.

1. Power off the device
2. Run MTK Module, Select Platform: Feature 
3. From Top right of the exe, Select Connection: Meta Mode 
4. Go to Repair IMEI Tab, Enable IMEI Repair Function 
5. Enable IMEIs and Click Execute 
6. Wait for Instruction the tool and connect USB cable. 
7.    -> Watch the Video Guide !!!

1. Power off your device, and charge the battery more than %30 
2. Press and hold Volume Up (+) and Connect Usb Cable
3. Wait Few secs, Device will gonna to Test Mode 
4. Install Diag Port Drivers 
5. Go to Hydra Qualcomm Module, From top right of the exe Connection Chose Diag 
6. Go to IMEI/ESN/MEID Tab, Fill IMEI boxes, and Click Repair IMEI [Diag] Buton 

1. Power Off your device, Run SpreadTrum Module
2. Select Brand and Model or CPU
3. Click Boot INFO for Boot the Device, You can check Connection title for How-To Boot
4. Go to Service -> Repair Tab, Enable IMEI option
5. Select IMEI 1 and IMEI 2 and Click Excute 

Powered by Froala Editor

1. Power on the Device, Connect USB Cable
2. From top Right of the Exe Select Diag Mode
3. Go to Service -> Repair Tab
4. Enable IMEI Option and Select IMEI Boxes
5. From Port box Select Diag Port and Click Execute 

Powered by Froala Editor

P.S : Redmi 7 and Redmi Y3 Need Authorized Server!

P.S 2 : This Function not work other xiaomi models!!

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect " Tag
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Bootloader, Select Generic Unlock 
6. Tick Auto Reboot, Click Excute and Wait for task completed. 

P.S : Android 9 and Upper devices Not supported, May you need Downgrade

P.S2 : New Xiaomi devices required Authorized Server

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to " Connecttion " title
3. Install QdLoader driver, you can get it from our Support area at Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Xiaomi Account, From Method keep this as " Remove Mi Account [Erase Method] "
   
6. Tick Auto Restart, Click Excute, Device Will reboot Auto
7. Before Connect Internet Connection Enable ADB (Usb Debug)
8. From Top right of the Exe Select " Connection as ADB Mode " 
9. Tick Xiaomi Account, From Method " Dissable MiAccount Anti-Relock Method 1 " 
10. Click Excute and Wait for task completed. 
11. Its Just Dissable Account, When you Format or Factory Reset it will back same Status. 

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Set device to Meta Mode, if you don't know how to do it, Check to " Connection - How to Set Meta Mode " title
4. From the top right of the exe Select Connection: Meta Mode  
5. Go to Service Tab, Tick Network Lock Security, From Method Select Direct Unlock Option 
6. Click Execute and Wait for your tas completed. 

1. Charge the battery more than %30 and power off device
2. Run Spreadrum Module, From Reboot Tab Select Enter Diag
3. From top right Select Connection: Diag  
4. Go to Service / Tool Tab, Tick SimLock Security  
5. Select SimLock Option, Read or Remove
6. From Port Box Untick Auto, Chose Diag Port 
7. Click Execute Buton and Wait for the task completed.  

1. Power on your device, Enable Diag Mode and Connect USB Cable
2. If you are don't know how to Enable Diag, Please check Connection title 
3. Run Main Module, From the top right of the Exe Select Platform/Tool: LG 
4. Go to Unlock and Repair Tab, Untick Auto Port, Select LG Diag Port
5. Select Method and Click Direct Unlock Buton
6. Wait for your task completed, its take can couple mins.

1. Power off the device
2. Run MTK Module, Select Platofrm : Feature 
3. From Top right of the exe, Select Connection : Meta Mode  
4. Tick User Coode, Select Method and Click Excute
5. Wait for Instruction the tool and connect usb cable. 

Powered by Froala Editor

1. Power on the Device, Connect USB Cable
2. From top Right of the Exe Select Diag Mode 
3. Go to Service Tab, Tick Simlock Security
4. Select Option / Method, Select Diag Port from Port box
5. Click Execute and Wait for operation the complete. 

Powered by Froala Editor

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Screen Lock Security, Select Method 
   
6. Read Pattern for UnEncrypted Userdata Android 5.1.1 and lower
7. Dissable Screen Locks App for Encrypted Userdata, Select Method and Click Excute

1. Charge the battery more than %30
2. Connect device to EDL Mode, if you dont know how to connect then Check to "How to Connect tag"
3. Install QdLoader driver, you can get it from our support area Drivers folder
4. Open Qualcomm Module, Untick Auto, Select Brand and Model
5. Go to Service Tab, Tick Screen Lock Security, Select Method 
6. Read Pattern for UnEncrypted Userdata Android 5.1.1 and lower
7. Dissable Screen Locks App for Encrypted Userdata, Select Method and Click Excute
8. May you need Restore Screen Lock App after Dissable.

P.S : New Xiaomi Devices Need Authrozied Server

1. Power off device
2. Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
3. Tick Screen Lock Security 
4. You will see Method, Read Pattern, Remove Locks Without Data Loss, Disable Screen Lock Apps 
5. Read Pattern: This option for Android 5.1 and lower versions, Upper Encrypted User Data Not Supported
6. Remove Locks Without Data Loss: This option for Android 5.1 and lower versions, Upper Encrypted User Data Not Supported
7. Disable Screen Lock App: This Method Remove System UI, Encrypted Userdata Supported, You need to Restore Screen Lock App after Disable. 
8. Select Method and Click Execute then wait for the task completed.

P.S : This Function may not work on All MTK Brands 

1. Charge the battery more than %30 and power off device
2. Run Spreadrum Module, Select Connection Option
3. Click BOOT INFO button for Booting  
4. You can check the Connection title also, " How to Boot Spreadrum by Flash Mode? "  
5. Go to Service / Tool Tab, Tick Screen Lock Security 
6. Select Method of Remove Locks Then Click Execute 
7. Wait for the task completed.  

1. Power On the Device and Connect USB Cable
2. Run Main Module, From the top right of the exe Select Platform/Tool: LG 
3. Under Platform Select  " Mode: AT/Modem Mode " 
4. Tick Screen Lock Security
5. Untick Auto Port, Select LG USB Mobile Modem Port 
6. Click Execute and Wait for task completion. 
7. Check device if still pattern exists Draw any Pattern.   

1. Power Off your device, Run SpreadTrum Module
2. Select Brand and Model or CPU
3. Click Boot INFO for Boot the Device, You can check Connection title for How-To Boot
4. Go to Service -> Tool Tab, Screen Lock Security
5. Select Read Code/Password [NOR] and Click Execute.

Powered by Froala Editor

1. Power on the Device, Connect USB Cable
2. From top Right of the Exe Select Diag Mode 
3. Go to Service Tab, Tick Screen Lock Security
4. Select Method / Option, Select Diag Port and Click Execute 

Powered by Froala Editor

1. Power on the device 
2. Go to Dial Screen, Dial *#558# 
3. Go to Verification Test -> Debug Port 
4. Run Qualcomm Module, From top right of the exe Select Connection : AT Command Mode 
5. Tick Demo Remove - AT Command, Select Port, Click Excute  

1. Power on the device 
2. Go to Dial Screen, Dial *#558# 
3. Go to Verification Test -> Debug Port 
4. Run MTK Module, From top right of the exe Select Connection : ATE Mode 
5. Tick Vivo Special Tool, Select Port, Click Excute  

Powered by Froala Editor

P.S: It will delete your user data, Please backup your data before using this function 

1. Power on your device and Enable USB Debug 
2. Connect your device to pc by USB cable
3. Run Main Module, From the top right of the Platform Select the Samsung 
4. Select Compatible with your device Tar AP File and Click Build 
5. It will take few min, May you need Factory Reset after Root

* Reading Lock code of Spreadtrum Feature/Keypad Phone by Hydra Dongle 

 * Hydra SpreadTrum Tool Diag and Flashmode - Feature Phone  

 * SpreadTrum SC6530 Read Dum [NOR] Chips

Powered by Froala Editor

ZTE & Turkcell Reset FRP and Factory Reset Video Guide

ZTE & Turkcell & Vodafone Write Firmware Video Guide

ZTE & Vodafone & Turkcell Repair IMEI PDF Guide

ZTE & Vodafone & Turkcell Reset FRP PDF Guide

* How to Write Firmware Xiaomi by Fastboot Mode ? 

* Redmi Note 5 Remove Mi Account by EDL Mode Video Guide 

 * Redmi S2/Y2 Unlock Bootloader and Write Firmware 

 * Xiaomi IMEI Repair by ADB and Root  

 * Redmi Note 5 Pro (Whred) Repair IMEI Video Guide 

 * Xioami Mi Note 3 Remove Mi Account and Reset FRP MIUI 10 

 * Xiaomi Mi 8 Lite Remove Mi Account & Reset FRP 

 * How to connect to Hydra Xiaomi Auth Server, PoccoPhone F1

Powered by Froala Editor

* Xiaomi & Qualcomm Write Firmware by EDL Mode PDF Guide

 * Redmi Note 6 Pro (tuip) Repair IMEI without Unlock Bootloader and Root 

 * Redmi Note 7 (lavender) Repair IMEI Without Root and unlock bootloader

 * Redmi S2 & Y2 Repair IMEI without unlock bootloader and root 

 * Redmi S2, Y2, Redmi 7 Unlock Bootloader Instant 

 * IMEI Repair by ADB + Root PDF Guide 

 * Reset Mi Account by EDL PDF Guide 

 * Unlock Bootloader Guide New Devices, Example : Mi 8 Lite (platina) 

 * Redmi Note 5 Pro (whyred) IMEI Repair PDF Guide  

 * Wipe Security / Reset EFS by TWRP PDF Guide  

 * Mi 9 Lite Dual IMEI Repair PDF Guide

 * Redmi Go (tiare) IMEI Repair PDF Guide 

* VIVO Y91 (1817) Reset FRP and Remove pattern Guide 

 * Vivo Y71 1724 Reset Frp and Format Guide

 * Vivo Y53 1606 Reset FRP and Format Guide 

 * Vivo 1804 V11 Pro FRP and Format Userdata  

 * Vivo Y55 remove pattern Guide

* How to Boot MTK Flash Mode Using Hydra 

 * How to Repair IMEI MTK - MT6737

* OPPO A83 New Security Remove FRP and Format Video 

 * Read All MTK Scatter Flash File With Hydra Dongle 

 * How to Select DA, Auth, Preloader Manuel at MTK Module 

 * How to Factory Reset MTK by Meta Mode 

 * How to Write Firmware MTK Scatter?

* Motorola MTK Remove FRP Video Guide

* Vivo 1901 Y15 Remove FRP and Pattern Lock by Flash Mode  

 * Vivo 1901 Y15 Remove Pattern Lock by MetaMode 

 * Vivo Y81i New Patch Pattern and Frp Video Guide  

 * Vivo Y17 Password reset With Hydra Tool Vivo 1902 Android 9

* OPPO A5S Factory Reset [Format] Meta Mode

 * OPPO  CPH1609EX Reset Pattern Lock With Hydra Dongle  

 * OPPO A71 CPH1717 Format + FRP by Hydra 

 * OPPO  F7 CPH1819 FRP + Format with TestPoint by Hydra 

 * Oppo F3 How to Read Flash File,NV File With Hydra Dongle 

 * How to Repair IMEI MTK Feature Phone  

  * How To Flash Samsung Phone by Hydra Tool?  

  * How to Root the Samsung Device?    

  * SM-J710F U5 Android 8 Root by Hydra Tool

Powered by Froala Editor

Huawei Hisilicon P20 Lite ANE LX Series Remove Pin/Pass And FRP 

Huawei Kirin Removing Pattern password and FRP 

  How to BOOT Spreadrum Devices? 

  How to Repair IMEI Spreadtrum by Diag? 

Powered by Froala Editor

This video will show you how to unbrick and Flash ZTE, Turkcell, Vodafone Qualcomm devices at EDL Mode

Redmi Note 7 IMEI Repair by ADB and Root

Powered by Froala Editor

ZTE & Turkcell & Vodafone Qualcomm Reset FRP Ex: Turkcell T80

Powered by Froala Editor

OPPO A5S Factory Reset [Format] MTK Module

Powered by Froala Editor

Vivo Y71 TestPoint 

Powered by Froala Editor

1 - Run Qualcomm Module 

2 - Select Brand and Model 

3 - Go to Flash Tab, Select rawprogram0.xml and patch0.xml 

4 - Do TestPoint to device for force EDL QdLoader Mode 

TestPoint Picture : 

Operation Screen Shot : 

Operation Logs :

Selected Comport : Auto

Selected Loader  : mi_2_9.elf

Searching Qualcomm 9008 Port[FOUND](COM5)

Getting device info.......

Serial No.: 0xCB90A34F

MSM ID    : 0x000CC0E1

PBL Ver   : 00000004

PK HASH   : A7B8B82545A98ECA23D6E9105FB46456

            8D1B5828264903441BDEF0CD57E3C370

Firehose Loader[mi_2_9.elf]

Sending ...............................

NULLOk

Connecting to Firehose...

Ping...... Ok 

Configuration......Ok

Chip Configuration :

 MemoryName : eMMC

 MaxPayloadSizeToTargetInBytes : 8192

 MaxPayloadSizeToTargetInBytesSupported : 8192

 MaxPayloadSizeFromTargetInBytes : 4096

 MaxXMLSizeInBytes : 4096

 TargetName : MSM8996

 Version : 1

 DateTime : Aug  2 2018 - 22:27:53

Running : Ok

Phone Information.....

Model           :    Redmi Note 6 Pro

Brand           :    xiaomi

Android Ver     :    8.1.0

Miui Ver        :    V10

Manufacturer    :    Xiaomi

Device          :    tulip

Mod_device           :    tulip_global

Display ID      :    OPM1.171019.011

Security Patch      :    2019-01-01

Kernel ID        :    2019-01-01

----------------------------

Flashing Selected Partitions 

>storsec(0)[storsec.mbn] Ok

>storsecbak(0)[storsec.mbn] Ok

>rpm(0)[rpm.mbn] Ok

>rpmbak(0)[rpm.mbn] Ok

>hyp(0)[hyp.mbn] Ok

>hypbak(0)[hyp.mbn] Ok

>pmic(0)[pmic.elf] Ok

>pmicbak(0)[pmic.elf] Ok

>cmnlib(0)[cmnlib.mbn] Ok

>cmnlibbak(0)[cmnlib.mbn] Ok

>cmnlib64(0)[cmnlib64.mbn] Ok

>cmnlib64bak(0)[cmnlib64.mbn] Ok

>abl(0)[abl.elf] Ok

>ablbak(0)[abl.elf] Ok

>devcfgbak(0)[devcfg.mbn] Ok

>devcfg(0)[devcfg.mbn] Ok

>tz(0)[tz.mbn] Ok

>tzbak(0)[tz.mbn] Ok

>mdtpsecapp(0)[mdtpsecapp.mbn] Ok

>mdtpsecappbak(0)[mdtpsecapp.mbn] Ok

>keymaster(0)[keymaster64.mbn] Ok

>keymasterbak(0)[keymaster64.mbn] Ok

>bluetooth(0)[BTFM.bin] Ok

>xbl(0)[xbl.elf] Ok

>xblbak(0)[xbl.elf] Ok

>misc(0)[misc.img] Ok

>dsp(0)[dspso.bin] Ok

>mdtp(0)[mdtp.img] Ok

>splash(0)[splash.img] Ok

>persist(0)[persist.img] Skipped

>modem(0)[NON-HLOS.bin] Ok

>boot(0)[boot.img] Ok

>recovery(0)[recovery.img] Ok

>cache(0)[cache.img] Ok

>system(0)[system.img] Ok

>vendor(0)[vendor.img] Ok

>cust(0)[cust.img] Ok

>userdata(0)[userdata.img] Ok

>PrimaryGPT(0)[gpt_main0.bin] Ok

>BackupGPT(0)[gpt_backup0.bin] Ok

Flashing Patch Configuration.. 

0 [NUM_DISK_SECTORS-34.]   OK

0 [NUM_DISK_SECTORS-34.]   OK

0 [NUM_DISK_SECTORS-34.]   OK

0 [NUM_DISK_SECTORS-34.]   OK

0 [NUM_DISK_SECTORS-1.]   OK

0 [NUM_DISK_SECTORS-1.]   OK

0 [NUM_DISK_SECTORS-33.]   OK

0 [CRC32(2,8192)]   OK

0 [CRC32(NUM_DISK_SECTORS-33.,8192)]   OK

0 [0]   OK

0 [CRC32(1,92)]   OK

0 [0]   OK

0 [CRC32(NUM_DISK_SECTORS-1.,92)]   OK

----------------------------

Done!

Elapsed Time : 00:08:05

Powered by Froala Editor

You need do TestPoint for force EDL Mode, Then run to Qualcomm Module, Select Brand and Model and Do what do you want. 

TestPoint Picture : 

Operation Screen Shot : 

Operation Logs :

Selected Comport : Auto

Selected Loader  : prog_emmc_firehose_Sdm660_ddr_8.mbn

Searching Qualcomm 9008 Port[FOUND](COM4)

Getting device info..

Device MODE : SAHARA

Connecting to Firehose...

Ping...... Ok 

Configuration......Ok

Chip Configuration :

 MemoryName : eMMC

 MaxPayloadSizeToTargetInBytes : 8192

 MaxPayloadSizeToTargetInBytesSupported : 8192

 MaxPayloadSizeFromTargetInBytes : 4096

 MaxXMLSizeInBytes : 4096

 TargetName : MSM8996

 Version : 1

 DateTime : Aug  2 2018 - 22:27:53

*** STORAGE DEVICE INFO ***

Memory Type         : eMMC

Block Size in Bytes : 512

Page Size           : 512

Manufacturer ID     : 144

Serial Number       : 180848751

Firmware Version    : 162

Product Name        : HCG8a4

Physical Partitions : 4

Total Logical Blocks:

          Storage [0]  122142720[58.242 GB]

          Storage [1]  8192[4 MB]

          Storage [2]  8192[4 MB]

          Storage [3]  8192[4 MB]

Running : Ok

Phone Information.....

Model           :    MI 6X

Brand           :    xiaomi

Android Ver     :    8.1.0

Miui Ver        :    V10

Manufacturer    :    Xiaomi

Device          :    wayne

Display ID      :    OPM1.171019.011

Security Patch      :    2019-03-01

Kernel ID        :    2019-03-01

======================================

*** FRP Reset ***

Resetting FRP...

Zero Wipe Ok

FRP Operation Done!!

All Done

======================================

Elapsed Time : 00:00:06

Powered by Froala Editor

You need do TestPoint for force EDL Mode, Then run to Qualcomm Module, Select Brand and Model and Write Unlock Bootloader file Which at Support Area

After Write Unlock bootloader File device will be black screen, Do not worry, Just with Vol- and Power put to Fastboot Mode, Then by Hydra From top right change connection as fastboot mode, 

Tick Xiaomi Bootloader option and unlock it, Later you will need write stock firmware, by EDL or Fastboot Mode. 

TestPoint Picture : 

Operation Screen Shot : 

Powered by Froala Editor

OPPO A83 MTK Format and FRP  

You need do TestPoint first and Tick to TestPoint Mode 

Powered by Froala Editor

Xiaomi Redmi Note 8 IMEI Repair 

Device Should be Rooted and Usb debug enabled. 

Powered by Froala Editor

Just install this to fix the issue : Download From Here !!

Or Install This QPST Version !!!

Powered by Froala Editor

Mi 9 Lite Dual IMEI Repair 

Note : Your device Should be unlocked bootloader and Rooted for This operation.

Press hold vol up and Power, Your device will gonna TWRP Mode, Then Insert usb cable to device, 

Go to Hydra Qualcomm Module from top right change connection as ADB Mode, Tick security options, 

at Method box you will see Wipe Security by TWRP Option, You can see at picture :

Your device will wipe security / EFS, Just reboot device as normally, 

and enable usb debbug and connect usb cable

From Reboots Tab Select "[ADB] Enable Diag [Rooted]"

 Method then Click Button

This Option Will enable your Diag Port, Then from top right Change connection as Diag Mode, 

Go to Repair/Calbiration Tab, Go to IMEI/ESN/MEID Tab, Tick IMEI illegal box and accept terms

from top right chose diag port, Enable IMEI 1 and IMEI 2 Fill  the IMEI box and Click to Repair.

Go to Support Area download engineer qcn and write it to by QPST, 

You can see QPST Tool at our support area, open QPST Tool and click to add new ports, 

Path of this at support area QCN/Xiaomi/Mi 9 Lite/ download the Mi_9_Lite_xqcn.zip, and unzip it

Add Port number of Diag, Server Clients Software Download Then go to Restore Tab

Select xqcn then Click Restore

Powered by Froala Editor

1. Set device to EDL Mode, if you dont know how to do it, Check " How to Connect " title
2. Install QdLoader drivers (Drivers are exist at Hydra Support Area)
3. Run Qualcomm Module, Select brand and Model,
4. Go to Service Tab, Tick Partitions
5. From Method Select Backup Method, we are prefer you are use " Backup All Partitions Except Userdata ", Because Userdata partition has big size.
   
6. Click Excute then Wait untill all partitions are writted. 

P.S : New Xiaomi devices need Authorised Server

1. Run HumTool Exe 
2. Click "Update All Hydra Softwares" Buton
3. it can take some time, It will update your database, modules, necessary file.    

Video guide : 

1. Run any Hydra Module 
2. At the bottom of the exe you will see Suppor Buton
3. Click it, Wait few mins Until it access Support Area